Deep Clean Your Fuel System At MTA Automotive

March 17th, 2010 by enders13

Having trouble with your fuel system? Bring your family car into MTA Automotive for a check up.
9400 N E Vancouver Mall Dr.
Vancouver, WA 98662
360-892-5638

Today we’re talking about fuel system cleaning. The first thing to know is how important it is to have a clean fuel system. You need fuel to go, and the cleaner your fuel system, the more efficiently the fuel will burn. That means more power and better fuel economy.

A clean fuel system saves money at the pump. We guess you could say, it all starts and ends at the pump. One of the most important things you can do to keep your fuel system clean is to buy good quality gas. Major brands have detergents that keep gum and varnish from rapidly building up in the fuel system.

So buying cheaper gas can actually cost you in the long run. Now, most cars on the road are more than five or six years old. That means they’ve had time for some dirt and rust to start accumulating in the fuel tank. This junk needs to be filtered out of the fuel before it hits your engine. That’s the fuel filter’s job.

When the fuel filter is clogged, the dirty fuel will bypass the filter and go on up to the engine where it can clog fuel injectors and get into the cylinders. That could do some damage. So you should have your fuel filter changed when recommended. Check your owner’s manual or ask your service advisor if your fuel filter is due for replacement.

The fuel then goes up into the throttle body. This is another area where varnish and gum can accumulate. A professional fuel system cleaning will use a combination of special cleaning chemicals and old fashioned swabbing to clean out the throttle body. Now, the fuel injectors are the last stop in the fuel delivery system.

It’s real important to keep those fuel injectors clean. The fuel injectors need to deliver a precise amount of fuel, at exactly the right time, in a particular spray pattern. They just can’t do that if they’re dirty. Dirty fuel injectors really rob power and waste fuel.

It is important for the fuel system proper, but there are a couple other things that will help keep your engine clean as well. Of course, air is mixed with the fuel before it’s burned. Dirty air means dirt gets into your engine, so you need to replace your engine air filter when it’s dirty.

The PCV value routes unburned fuel that escapes into the lower engine back up into the intake system to be burned. A sticky PCV valve needs to be replaced to make sure that system is working properly and the breather filter needs to be replaced if it’s dirty as well.

Do all these things and your engine’s air and fuel will be as clean as possible. You’ll get much better fuel economy and better power

.

Posted in Fuel System | No Comments »

Tire Maintenance In Vancouver

March 10th, 2010 by enders13

With the recent focus in Vancouver on improving fuel economy, we’ve been told how important it is to maintain our tire pressure.

Everyone in Vancouver knows that tires wear out, but we all want to make them last as long as possible because they’re fairly expensive to replace. In addition to saving gas, properly inflated tires last longer. Under-inflated tires will wear out more quickly.

Some people in Vancouver wonder if there is benefit to adding a few extra pounds of pressure when they fill up their tires. But actually, there isn’t. In fact, there are very good reasons not to over-inflate your tires. For one, the middle of the tread will wear unevenly because the full tread is not contacting the road properly. That also adversely affects your handling.

Come in and see us about tire maintenance for your Vancouver, WA vehicle.
MTA Automotive
9400 N E Vancouver Mall Dr.
Vancouver, WA 98662
360-892-5638

Every vehicle in the Vancouver area has a sticker on the driver’s side door jamb that tells you the manufacturer’s recommended tire pressure. This recommendation is an integral part of the vehicle’s suspension tuning. A lot of engineering actually goes into the recommended tire pressure, so it’s important to follow it.

What else do we need to know about tire maintenance? Tire rotation and balancing are very important. Let’s start with rotation. Because the front tires handle the brunt of turning forces, the shoulders of the front tires wear more quickly than the rear tires. We rotate the tires so that they all get to do some duty on the front and they’ll all wear evenly over their life.

For most vehicles, front tires are rotated to the rear and vice versa. Others recommend a cross rotational pattern. Some vehicles use an asymmetrical tire so those tires need to stay on either the right or left side – it’ll say which on the tire. Some high performance cars have asymmetrical tires and different sizes on the front and rear. These can’t be rotated at all. Your owner’s manual will have details for your car.

How often should you rotate your tires? Your owner’s manual will have a recommendation. Your service advisor at MTA Automotive can do a visual inspection to let you know if it looks like it should be done. The interval is typically around 5,000 miles.

You know, some people don’t think new tires need to be balanced. What they aren’t taking into account is the wheel. Between the wheel and the tire – even a new tire – there’s enough variation to require balancing.

When you add the valve stem and tire pressure monitoring sensors required on new cars, balancing is definitely in order. When a tire’s out of balance, it’s actually hopping down the road. You’ll feel the vibration through the steering wheel if a front tire’s out of balance and through your seat if it’s a rear tire.

Proper wheel balance promotes tire life and increases safety. Historically, lead weights have been attached to the wheel to bring it into balance. Lead gives some environmental concern, so steel weights are starting to be substituted.

Also, always use the same size tire on an axle. Different size tires on the front or on the back can lead to some real handling problems. And tire manufacturers recommend that when you get two new tires, they be installed on the rear because that’s where you need the most traction to avoid spinning-out.

Posted in Tires and Wheels | No Comments »

What To Do In Case Of An Accident in Brush Prairie

March 5th, 2010 by enders13

Screeching tires, crunching metal – it’s an accident! If you’ve ever been in a car accident in Brush Prairie, even a minor one, you know how upsetting it can be. It’s hard to think straight and know what to do.

Let’s review what you should do in case of an accident:

When an accident occurs, you should always stop. Leaving the scene of an accident in Vancouver is considered a crime – even if it’s not your fault. And hit and run penalties are fairly severe, possibly resulting in steep fines, loss of your WA driver’s license or even jail time.

Your jurisdiction may require that you try to help someone who is injured by calling for help or performing first aid if you are able. Warn other Battle Ground and Vancouver motorists by putting out flares, using your flashers or lifting your hood. Call Brush Prairie emergency services as soon as possible. Tell the operator if medical or fire help is needed.

Always file a Vancouver police report. It’s tempting to skip this if everything seems to be ok. But without a police report, the other guy can say whatever he wants about the accident later, and you’ll not have an objective report to help defend yourself. Discuss the accident only with the police. Emotions are strong after an accident and we naturally want to talk about it – don’t. Never admit fault or guilt to anyone including the police officer. Sometimes we may feel at fault, but in the eyes of the law, the other guy is responsible.

Truthfully give the officer the facts: such as “I was going thirty miles an hour” not “I wasn’t speeding”. Remember, anything you say to the officer or anyone else can be used against you.

Also get the officer’s name and ID number and ask where you can get a copy of the accident report.

Get the facts on the driver and owner of the other vehicle:

  • Name
  • Address
  • Phone number
  • Date of birth
  • Driver’s license number and expiration
  • Insurance information

Also take down a description of the other Vancouver vehicle, license plate and vehicle identification number. Most WA auto insurance companies don’t record license plate numbers, so the VIN number is the best way to track the vehicle.

Ask witnesses, including passengers, to wait for the police. If they can’t wait, ask for contact information and request that they write a brief description of what they saw. If someone refuses to leave their name, write down their license plate number so the police can track them down later if necessary. Always call your insurance agent or your insurance company. Call or see a physician if you think you may have been injured. For vehicle repairs, call MTA Automotive at 360-892-5638

Contact MTA Automotive to learn more about what do do in case of an auto accident.
You can find us at:
9400 N E Vancouver Mall Dr.
Vancouver, WA 98662
Or call us at 360-892-5638

MTA Automotive and AutoNetTV hope that you never have to use this information and wish you happy Vancouver travels.

Posted in Automotive News | No Comments »

Transmission Care In Vancouver WA

February 23rd, 2010 by enders13

Call MTA Automotive to make an appointment to check your transmission in Vancouver.
9400 N E Vancouver Mall Dr.
Vancouver, WA 98662
360-892-5638

Do you have any plans around Vancouver WA for the weekend? Maybe you and some friends and are taking the boat up to the lake. Maybe you’ll be having a lot of fun water skiing and doing a little fishing.

You got the boat all ready. It’s all gassed up. You packed lots of snacks and the cooler’s stocked – ready to go.

How about your tow vehicle? It has plenty of gas and you’ve even vacuumed it out, but is your auto maintenance up to date?

Stop and think. You’ll have some heavy traffic on your way out of town. Hilly terrain as you get to the lake. Some dirt roads – and it may be hot weather. And all the time you’re going to be towing around several thousand extra pounds.

That all adds up a lot of severe strain on your engine, brakes and transmission. Your transmission’s going to be working overtime, spending more time in lower gears. The internal transmission temperature is going to be much higher than normal. What’s a fun little blast to the lake for you is really severe duty for your transmission.

It’s important that you have enough transmission fluid. If you’re running low, the transmission will run to hot and won’t have the protection it needs to cope with the added stress of towing.

And if it’s time for a transmission service, you really should have it done at MTA Automotive before your trip. Transmission fluid breaks down and gets dirty over time. Whether you have an automatic or manual transmission, you need to have it serviced on schedule to make sure it runs efficiently.

Automatic transmissions contain a maze of passages that the fluid has to pass through to keep it shifting smoothly. If you neglect transmission service, the passages can get clogged up and you start to have problems. Neglect your transmission for too long, and it can fail. Believe us – you don’t want to pay for a major transmission repair.

You know, most of us in Vancouver WA do a lot of our driving under severe conditions. Towing or hauling a big load is obvious, but there are lots of other things that constitute severe driving conditions. Things like short trips or driving in very hot or very cold weather. Also, dusty roads, city driving around Vancouver, and basically any driving that’s not at highway speeds or under ideal conditions is severe driving. We all need to think about whether or not we need to follow the severe service schedule.

So, consider going in for a full service oil change before you leave for the lake to make sure everything has been looked at. Ask for a trip inspection while you’re at it. Your Vancouver WA service technician at MTA Automotive can check your belts and hoses and let you know if your brakes are in good shape.

Don’t forget the sunscreen. And to thank your Vancouver service technician, how about bringing him back a nice trout?

Posted in Transmission | No Comments »

Keeping Your Car Young in Vancouver

February 19th, 2010 by enders13

We live in such a disposable society here in Vancouver. It’s amazing all the stuff we throw away.

New stuff comes out so fast, we just toss the old and move on. It seems like when we were kids, our parents were real sticklers about taking care of our stuff. You know, hang up your clothes, polish your shoes, put away your toys. If something got lost or ruined by neglect, tough – we had to do without.

We couldn’t afford new cars very often, so we tried to make them last as long as we could. It’s a good thing that cars are more reliable these days.

They just don’t break down as often. And the good news for us penny pinchers is that a modern car can easily go 200,000 miles with proper care. The engineering’s there and so is the manufacturing quality. The missing ingredient is us making sure we follow the manufacturer’s recommended maintenance schedules.

Is it really that bad to get off schedule? Well, it all adds up. Every time you go a couple thousand extra miles between oil changes, you’ve created an opportunity for sludge to form and clog passages. Then some parts don’t get oiled and they start to wear out faster.

Skip a cooling system service, and the corrosion inhibitors become depleted, and the radiator starts being damaged – one step closer to a failure. The same thing is true for transmission service, power brakes, fuel system cleaning – really everything on your schedule.

It’s also even more important for older vehicles. Those engines and other systems have had more time to get dirty, so they’re a bit more stressed anyway. But it’s never too late to get back on track with your maintenance and to hold off further damage.

It’s just another example of our parents being right. (Surprising how often that happens.) And it really does start with the oil change, just like Dad said. When you get a full service oil change they top off all your fluids and check for other items that are on your maintenance schedule. That’s like your safety net – go in for oil changes on time, and let your service advisor at MTA Automotive help you keep track of the rest.

Of course, some things are going to wear out along the way, stuff like alternators, water pumps and such. But that stuff is cheaper than a new car payment. And taking care of problems early means they have less time to cause other problems. It’s like having high cholesterol – you don’t want to wait for a heart attack before you address it.

Posted in Maintenance | No Comments »

Vancouver Drivers Severe Service Maintenance Schedules

February 9th, 2010 by enders13

Your vehicle manufacturer publishes two auto maintenance schedules. The regular schedule and the severe service schedule. It’d be wrong for us to tell you that everyone in Brush Prairie always needs to follow the severe service schedule – but its wishful thinking to say that the regular schedule is always good enough for your family car.

Contact MTA Automotive to learn more about Severe Service Requirements for your family car
You can find us at:
9400 N E Vancouver Mall Dr.
Vancouver, WA 98662
Or call us at 360-892-5638

At MTA Automotive we’ll give you the definitions and explain the issues, and you can be the judge. Most manufactures list the following as severe conditions:

  • Most of your trips are less than four miles.
  • Most of your trips are less than 10 miles and outside temperatures are below freezing.
  • The engine is at low speed most of the time – not on the highway.
  • You operate your vehicle in dusty areas.
  • You regularly tow a trailer or carry heavy loads.
  • Driving in very hot or very cold weather.

So think about your typical week. Do you live a block from a WA freeway on-ramp and enjoy a non-stop commute to work in Battle Ground or Vancouver? Or are you like the rest of us where 90% of our trips are on the severe service list?

The answer may be different at different times of the year and for the different drivers in your family. Think of the two service schedules as bookends. Let’s suppose your owner’s manual says the severe service oil change recommendation is 3,000 miles and the standard recommendation is 5,000 miles. You know that you need to change the oil somewhere between 3,000 and 5,000 miles. Look at your driving patterns and Vancouver road conditions and honestly evaluate which end of the spectrum you’re closer to.

If you have a job in a neighboring town such as Camas or Battle Ground and most of your commute is freeway miles, you may choose the regular service schedule for your car. On the other hand, if you live within a few miles of work and only get on the highway a handful of times every month, something closer to the severe service schedule is more appropriate.

Now why is this so important? Moisture builds up in the engine oil from normal condensation. Short trips around Brush Prairie or driving when it’s really cold means that the engine doesn’t heat up enough for the moisture to evaporate. The water in the oil leads to oil sludge that gums up your engine and doesn’t let the oil protect it as well. That’s why you need to change your oil more frequently – to get the sludge out before it causes problems.

Towing, heavy loads and very hot WA summer weather means that your engine and transmission will operate at higher temperatures and with more stress. The fluids will break down more quickly. Additives that clean and prevent corrosion will be depleted sooner. Dusty conditions, which may extend also to areas with high air pollution, mean that fluids will get dirty faster and that filters will plug up and won’t work right.

All of these things can lead to premature wear and repairs down the road. They’ll also hurt your fuel economy. If you want some personalized advice, talk with your considerate MTA Automotive service advisor. We can help you restore your vehicle to good working order and help you know the best schedule to follow. If you’re not sure, err on the side of protection.

Watch our informative AutoNetTV auto video tips at the top of this post.

Posted in Monitoring System | No Comments »

When Are Your Tires Worn Out?

February 3rd, 2010 by enders13

Hey Brush Prairie, are your tires worn out? What is the standard for our WA streets? How can you tell on your family car?

While there may be legal requirements for the Brush Prairie area, there are safety concerns that go beyond meeting minimum replacement mandates.

2/32 is the depth of the tire tread wear indicator bars that US law has required to be molded across all tires since August 1, 1968. When tires are worn so that this bar is visible, there’s just 2/32 of an inch – 1.6 millimeters – of tread left. It’s that level of wear that’s been called into question recently.

We’re referring to the Consumer Reports call to consider replacing tires when tread reaches 4/32 of an inch, or 3.2 millimeters. And the recommendation is backed by some very compelling studies.

The issue is braking on wet surfaces in and around Brush Prairie. Most of us think of our brakes doing most of the work, but if you don’t have enough tread on your tires, the brakes can’t do their job. When it’s wet or snowy, the tread of the tire is even more critical to stopping power.

Picture this: you’re driving over a water covered stretch of road near Brush Prairie, WA. Your tires must be in contact with the road in order to stop. That means that the tire has to move the water away from the tire so that the tire is actually contacting the road and not floating on a thin film of water.

Floating on the surface of water is called hydroplaning. So if there’s not enough tread depth on a tire, it can’t move the water out of the way and you start to hydroplane.

In the study a section of a test track was flooded with a thin layer of water. If you laid a dime on the track, the water would be deep enough to surround the coin, but not enough to cover it.

A car and a full-sized pick-up were brought up to 70 miles per hour, or 112 kilometers an hour and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths:

  • New tire tread depth
  • 4/32 of an inch
  • 2/32 of an inch

So what happened with the 2/32 tires on the car? Get this – when the car had traveled the distance required to stop with new tires, it was still going 55 miles an hour. Stopping distance was nearly doubled to 379 feet and it took 5.9 seconds.

Wow! That means if you barely have room to stop with new tires, you would hit the car in front of you at 55 miles an hour with the worn tires.

Now, with the partially worn tires – at 4/32 of an inch – the car was still going at 45 miles an hour at the point where new tires brought the car to a halt. It took nearly 100 feet more room to stop and 1.2 seconds longer. That’s a big improvement. We can see why Consumer Reports and others are calling for a new standard.

Of course, stopping distances were greater for the heavier pick-up truck.

How do you know when your tires are at 4/32 of an inch? Easy; just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

You may remember doing that with pennies. A penny gives you 2/32 to Abraham Lincoln’s head. The quarter is the new recommendation – 4/32.

How do people feel about replacing their tires earlier? Well, tires are a big ticket item and most people want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out?

For us, and we would guess for many, the answer is “no”.

MTA Automotive
9400 N E Vancouver Mall Dr.
Vancouver, WA 98662
360-892-5638

Posted in Tires and Wheels | No Comments »

Fuel Filter Service in Vancouver WA

January 26th, 2010 by enders13

There are a surprising number of small, inexpensive parts that can lead to expensive engine damage when they fail. It doesn’t seem right.

Fortunately a lot of those things can be taken care of in routine maintenance. They may not be easy to remember, because it is a long list, but your service center at MTA Automotive can help you know what’s scheduled to be taken care of.

Some of us in Vancouver WA really don’t look forward to going in for an oil change and then getting a list of the other things the manufacturer recommends.

But automotive maintenance is all about prevention, and addressing small problems before they get big. Let’s take the fuel filter for example.

You may not know this but the median age for private vehicles on our Vancouver WA roads is over nine years. When cars get older, five years or so, they’ve accumulated a lot of dirt and rust in their gas tanks. If that dirt gets into the engine it can cause thousands of dollars worth of damage. So somewhere between that dirty gas tank and the price of a great vacation – is the lowly fuel filter: a very inexpensive part that doesn’t cost too much to replace. And your car’ll just run better too.

A clogged fuel filter can’t let enough fuel through. You might notice at first that your car is running fine around town, but struggles or sputters on the Vancouver WA freeway or when you accelerate. Enough fuel can’t get through to meet the demands of higher speed. If it gets bad enough your engine might just shut off or not start at all, which could be dangerous.

Some fuel filters have a bypass. When they get clogged, they allow dirty fuel to move around the filter element so dirt ends up in the engine. We’ve already talked about how expensive that can be.

The fuel filter is even very important for newer cars. The fuel is still dirty even if there isn’t rust in the tank. It’s just that the fuel filter will need to be changed more frequently as the vehicle gets older.

How often should you change your fuel filter? Check your owner’s manual. Your Vancouver WA service advisor at MTA Automotive can tell you as well. It’s usually around thirty thousand miles or so. Ask if it’s time for a full fuel system cleaning as well. They often go hand in hand.

It’s good to know that your Vancouver WA service center has your back. When you’re motivated to maintain your vehicle’s performance and to reduce operating costs, you’ll think of MTA Automotive as your ally – and maybe even your memory.

Posted in Fuel System | No Comments »

Diesel Maintenance For WA

January 22nd, 2010 by enders13

At MTA Automotive we hear from a lot of people who are excited about the new diesel engines that will soon be available in passenger cars and SUV’s. But our WA friends are often curious about the preventive maintenance requirements. People may not know that diesel engines have long been used extensively in Europe and Asia. In fact, in some markets, there’re nearly as many diesel powered passenger cars as there are gasoline.

Here’s who’s announced or is expected to announce new diesels for North America: BMW, Mercedes, Audi, Volkswagen, Nissan, Honda, Toyota, Hyundai and Subaru. Of course, the US auto makers will be expanding their diesel offerings as well. Diesels will become a very big deal here in WA.

You may ask, why has it taken so long getting to WA and North America? There are a bunch of reasons like fuel tax policies and such, but the biggest hurtle was that WA diesel fuel had a high sulfur content – too high for the latest generation of highly refined diesel engines. Recent government mandates to remove sulfur now opens up WA to the engines the rest of the world’s been enjoying for a long time.

Why are diesels so popular worldwide? Well, for starters, diesels get up to 30% better fuel economy than gas engines. And they last a lot longer. And modern diesel engines are refined, quiet and powerful – and there’s none of that black smoke we used to see.

Some people may think that diesels create more pollution. But, you need to rethink diesels. Environmental pollution standards for diesel cars and light trucks are scheduled to be as strict as they are for gasoline vehicles. A modern diesel engine is as clean as a gas engine.

You may also have heard a lot in the news about bio-diesel. The exciting thing about diesels is that they’re not limited to fossil fuels. They can run on fuel made from vegetable oil. There are refineries that make diesel fuel from cellulosic waste like woodchips from lumber mills. There’s even this cool new process where a special strain of algae is used to convert carbon dioxide, water and sunshine into bio-diesel. That’s still a ways off, but you can see that diesel can become a sustainable source of fuel.

And, there are not a lot of trade off’s with diesel in terms of performance. A modern passenger car diesel is very smooth, quiet and quick. Most folks wouldn’t notice any difference. For those who tow trailers and haul heavy loads, diesels will be an improvement.

Now diesel engines are heavy duty, so they cost more than gas engines. But they get better fuel economy – so the break-even point is largely dependent on the difference between WA gas and diesel prices at the pump and how many miles you drive. And diesels have a higher resale value.

Now, let’s get back to diesel maintenance. You have to keep in mind that most of the new diesels are just coming in, or will be over the next couple of years, so we don’t have the maintenance schedules to make direct comparisons yet.

But going off what we already have in WA, we can expect fluid drain intervals to be similar to gasoline engines. Diesels do require very clean fuel, air and oil, so their filters are much higher capacity than gasoline filters and cost more. The engine air filter needs to be changed more frequently as well.

Repair costs are similar. As with gasoline engines, proper maintenance is the key to long engine life and to avoiding repairs. So pretty much what we have come to expect with gas vehicles; coolant system service, transmission service, power brakes, power steering, differential, filters, fuel system, and so on. And the payoff for you, if you’re the kind that likes to keep your vehicles for a long time, is that a properly maintained diesel engine can last for hundreds of thousands of miles.

Posted in Fuel System | No Comments »

Keeping Your ‘Old Faithful’ Auto Running

January 12th, 2010 by enders13

At MTA Automotive we’ve had a lot of people asking how they can make their vehicles last longer. These questions are actually a reflection of a trend that’s been building for several years. The median age of personal vehicles is now over nine years. And 33 percent of all vehicles on the road have over 75,000 miles on them. It looks like it’s going to keep heading in that direction for a while. With high fuel prices a lot of folks are putting off buying a new car. Thanks to AutoNetTV, we can provide you with a video answer to this question.

So let’s say you’re one of the average people in the Brush Prairie area; you’ve got a nine year old car with 80,000 miles on the odometer. What can you to do make it last another year or two?

Let’s start with the premise that there’s no reason that a modern car can’t run for 200,000 miles with proper care. The engineering and manufacturing quality is there.

Of course, some parts will wear out along the way, but there’s no reason for a catastrophic meltdown if you stay on top of your recommended maintenance. The maintenance schedule in some owner’s manuals runs out at 60,000 miles or so: how do we know what to do when we’re way past that?

It is a challenge, for example: If a service is recommended every 15,000 miles for the first 60,000 miles you can just keep getting it done at least every 15,000 miles after you hit 60,000 miles. But, it gets more complicated because older engines lose some efficiency, are dirtier inside and are just more stressed. That means it’s very important to not miss any scheduled services. Skipping just one oil change, for example, leaves an opportunity for harmful sludge to build up.

So all the usual things like oil changes, transmission service, coolant service, brakes, power steering, fuel system cleaning – all that stuff need to be maintained. People responsible for fleet vehicles around Brush Prairie are positively religious about scheduled maintenance. They know that money spent on maintenance saves them three ways:

  1. it saves fuel;
  2. it prevents costly repairs, an;
  3. they can postpone purchasing new vehicles.

Having the oil changed may be the most important thing. A full service oil change means that all of your other fluids get topped off so they are never low enough to cause damage. It also gives your technician a chance to spot problems in the early stages so that you can fix them before they get expensive. And it gives you a touch point with a professional along the way to remind you of things that aren’t scheduled as often – things like differential service and timing belt replacement.

If you live in the Brush Prairie area and have an older vehicle, you may need to follow the severe service maintenance schedule. Check your owner’s manual and talk with your service advisor at MTA Automotive. Conditions inside an older engine, transmission and cooling system can arguably be considered severe – so shorter intervals could well be called for.

And, we would strongly encourage you to consider using high mileage formulation fluids. They’re fluids like engine oil, transmission fluid and coolant that are formulated for older engines. They have special additives to clean deposits, and to condition and restore seals and gaskets that dry out with age. Some people start using higher mileage formulations at around 50,000 miles as a preventive measure.

Of course you also want to still look marvelous in your older car. Salt and road grime wreak havoc on your paint job and can lead to body rust – so regular washing is very important. Also, a good quality waxing is recommended at least twice a year.

Give us a call for more information:

MTA Automotive
9400 N E Vancouver Mall Dr.
Vancouver, WA 98662
360-892-5638

Posted in Maintenance | No Comments »

« Older Entries